Universal Mounting System for Strip Doors  
 Universal Mounting System for Strip Doors
Exclusive universal mounting system is available in your choice of Aluminum or Galvanized Steel. All mounting holes are pre-drilled and all fasteners, except those needed to attach our mounting system to the existing building material, are supplied.

This innovative system, consisting of a specially designed angle and face plates, allows the Clear-Flex II® Strip Door to be mounted in either the lintel (inside frame, under-header) or side wall (header) position (note diagrams on this page).

Each PVC strip is secured between the vertical side of the angle and one foot face plate sections. Worn or damaged strips may be easily replaced by simply removing the necessary number of face plate sections, replacing the appropriate strips and reattaching the face plates.

Universal Mounting Galvanized
Universal Mounting Aluminum

Illustration of a Horizotal Slide KitClear-Flex II® Strip Doors may be attached to a galvanized steel trolley system enabling the user to slide the strip door away from the doorway, thus allowing unobstructed traffic. Allow sufficient wall space for curtain storage on either side of the door as needed. Side wall mounted only.

Universal Moounting Hardware

Offset Bracket KitEnables Clear-Flex II® Strip Doors to be mounted on inside of buildings in conjunction with conventional overhead (roll-up) doors. Bracket projects 8” and is designed to be welded or bolted into place. Brackets must be positioned so as to not interfere with normal door operations. Horizontal cross member required, but supplied by others. Safety orange replacement strips (8” x .080 x 14” long) may be attached to bracket projection for 3-sided enclosure. 
Field trim to desired length.

Walkin System Mounting Hardware
© 2011 American Overhead Door & Dock, Inc. All Rights Reserved.